- 2010 Lincoln Town Car Transmission Fluid Change
- Tools and Materials
- Safety Precautions
- Step-by-Step Instructions
- 1. Locate the transmission fluid drain plug
- 2. Place a drain pan under the transmission
- 3. Drain the transmission fluid
- 4. Replace the transmission fluid filter (if applicable)
- 5. Reinstall the drain plug
- 6. Add new transmission fluid
- 7. Check the transmission fluid level
- 8. Clear the transmission fluid change indicator (if applicable)
- Tips
- Conclusion
2010 Lincoln Town Car Transmission Fluid Change
Tools and Materials
- New transmission fluid (check your owner’s manual for the recommended type and capacity)
- Transmission fluid filter (if applicable)
- Drain pan
- Funnel
- Rag or shop towels
- Wrench
- Torque wrench
Safety Precautions
- Park the car on a level surface and engage the parking brake.
- Allow the engine to cool down completely before starting any work.
- Wear gloves and safety glasses to protect yourself from hot fluid and debris.
Step-by-Step Instructions
1. Locate the transmission fluid drain plug
The transmission fluid drain plug is usually located on the bottom of the transmission pan. It is typically a 17mm bolt.
2. Place a drain pan under the transmission
Position the drain pan under the transmission fluid drain plug.
3. Drain the transmission fluid
Use a wrench to loosen the drain plug and allow the transmission fluid to drain into the pan. Be careful not to overtighten the drain plug when reinstalling it.
4. Replace the transmission fluid filter (if applicable)
If your transmission has a replaceable filter, now is the time to replace it. Consult your owner’s manual for the specific location and removal/installation instructions for the filter.
5. Reinstall the drain plug
Once the transmission fluid has drained, reinstall the drain plug and tighten it to the specified torque using a torque wrench.
6. Add new transmission fluid
Use a funnel to add new transmission fluid to the transmission until the fluid level reaches the “Full” mark on the dipstick.
7. Check the transmission fluid level
Start the engine and let it idle for a few minutes. Then, check the transmission fluid level again and add more fluid as needed to bring it to the “Full” mark on the dipstick.
8. Clear the transmission fluid change indicator (if applicable)
Some vehicles have a transmission fluid change indicator light that needs to be reset after a fluid change. Consult your owner’s manual for specific instructions on how to reset the indicator.
Tips
* It is recommended to change the transmission fluid every 30,000 to 60,000 miles, or as specified in your owner’s manual.
* If your transmission fluid is dark or smells burnt, it may be a sign that it needs to be changed sooner.
* If you are not comfortable changing the transmission fluid yourself, you can take your vehicle to a mechanic to have it done.
* Be sure to dispose of the old transmission fluid properly.
Conclusion
Changing the transmission fluid in your 2010 Lincoln Town Car is a relatively simple procedure that can be done in about an hour. By following these step-by-step instructions, you can save yourself some money and keep your transmission running smoothly for years to come.