1989 Town Car Transmission Cooler Diagram
Overview
The transmission cooler is an important part of the cooling system for the transmission. It helps to keep the transmission fluid cool, which prevents the transmission from overheating. The transmission cooler is located in the front of the car, near the radiator. It is a small, rectangular box with two hoses connected to it.
Diagram
The following diagram shows the location of the transmission cooler on a 1989 Town Car:
Replacement
If the transmission cooler is leaking or damaged, it will need to be replaced. The following steps will show you how to replace the transmission cooler:
1. Disconnect the negative battery terminal.
2. Raise the front of the car and support it on jack stands.
3. Locate the transmission cooler. It is located in the front of the car, near the radiator.
4. Disconnect the two hoses from the transmission cooler.
5. Remove the bolts that hold the transmission cooler in place.
6. Install the new transmission cooler.
7. Tighten the bolts that hold the transmission cooler in place.
8. Connect the two hoses to the transmission cooler.
9. Lower the car and reconnect the negative battery terminal.
Troubleshooting
If you are having problems with the transmission cooler, there are a few things that you can check:
* Check the fluid level. The transmission fluid should be at the correct level. If it is too low, it can cause the transmission cooler to overheat.
* Check for leaks. If the transmission cooler is leaking, it will need to be replaced.
* Check the hoses. The hoses that connect to the transmission cooler can become clogged or damaged. If they are clogged, it can restrict the flow of fluid to the transmission cooler. If they are damaged, they can leak.
Conclusion
The transmission cooler is an important part of the cooling system for the transmission. It helps to keep the transmission fluid cool, which prevents the transmission from overheating. If the transmission cooler is leaking or damaged, it will need to be replaced.
