BeamNG.drive Drag Transmission for All Cars
Introduction
The BeamNG.drive drag transmission is a powerful tool that can be used to improve the performance of your drag car. It allows you to fine-tune the gear ratios and shift points of your transmission to optimize acceleration and top speed.
This guide will show you how to install and configure the drag transmission for all cars in BeamNG.drive.
Installation
1. Download the drag transmission mod from the following link: https://www.beamng.com/resources/drag-transmission.2332/
2. Extract the contents of the ZIP file to your BeamNG.drive mods folder.
3. Start BeamNG.drive and go to the mods menu.
4. Select the “Drag Transmission” mod and click the “Install” button.
Configuration
Once the drag transmission is installed, you can configure it by going to the “Settings” menu and selecting the “Transmission” tab.
The following options are available:
* Gear ratios: This setting allows you to change the gear ratios of the transmission. The higher the gear ratio, the faster the car will accelerate in that gear. However, higher gear ratios also reduce top speed.
* Shift points: This setting allows you to change the shift points of the transmission. The higher the shift point, the later the transmission will shift into the next gear. Higher shift points can improve acceleration, but they can also reduce top speed.
* Clutch type: This setting allows you to choose the type of clutch that the transmission will use. The available options are:
* Single plate: This is the most common type of clutch. It is relatively inexpensive and easy to maintain.
* Multi-plate: This type of clutch is more expensive and requires more maintenance, but it can handle more power than a single plate clutch.
* Centrifugal: This type of clutch engages automatically when the engine reaches a certain RPM. It is commonly used in drag racing applications.
* Lockup torque converter: This setting allows you to choose whether or not to use a lockup torque converter. A lockup torque converter can improve fuel economy and reduce transmission heat, but it can also reduce acceleration.
Tuning
The drag transmission can be tuned to optimize performance for your specific car and drag racing application. The following tips can help you get started:
* Start with the default settings and adjust them少しずつ. This will help you avoid making drastic changes that could damage your car or transmission.
* Use a data logger to track your car’s performance. This will help you see how changes to the transmission settings affect your car’s acceleration, top speed, and fuel economy.
* Test your car on different tracks. This will help you find the settings that work best for your car and the specific track you are racing on.
Conclusion
The BeamNG.drive drag transmission is a powerful tool that can help you improve the performance of your drag car. By following the steps in this guide, you can install and configure the drag transmission to optimize acceleration, top speed, and fuel economy.
