Can’t Reach Transmission Fluid in Car

Why Can’t I Reach the Transmission Fluid?

There are a few reasons why you may not be able to reach the transmission fluid in your car. Some cars have a transmission pan that is located in a difficult-to-reach spot, such as under the exhaust system or behind the engine. Other cars have a sealed transmission that does not have a dipstick, so you cannot check the fluid level. If your car has a sealed transmission, you will need to take it to a mechanic to have the fluid checked and changed.

What to Do if You Can’t Reach the Transmission Fluid

If you are unable to reach the transmission fluid in your car, there are a few things you can do. First, check your owner’s manual. The manual may have instructions on how to access the transmission fluid. If the manual does not have any instructions, you can try looking for a YouTube video that shows how to check the transmission fluid in your car. If you are still unable to reach the transmission fluid, you will need to take it to a mechanic.

How to Check the Transmission Fluid

Once you have reached the transmission fluid, you will need to check the fluid level. To do this, follow these steps:

1. Start the engine and let it idle.
2. Pull out the transmission dipstick.
3. Wipe the dipstick clean.
4. Reinsert the dipstick into the transmission.
5. Pull out the dipstick again and check the fluid level.

The transmission fluid should be between the “full” and “add” marks on the dipstick. If the fluid level is low, you will need to add fluid to the transmission. To add fluid, follow these steps:

1. Purchase the correct type of transmission fluid for your car.
2. Locate the transmission fluid filler tube.
3. Add fluid to the transmission until the level is between the “full” and “add” marks on the dipstick.

How to Change the Transmission Fluid

If the transmission fluid is dirty or burnt, you will need to change it. To change the transmission fluid, follow these steps:

1. Purchase the correct type of transmission fluid for your car.
2. Locate the transmission drain plug.
3. Place a drain pan under the transmission.
4. Remove the drain plug.
5. Allow the transmission fluid to drain into the pan.
6. Replace the drain plug.
7. Locate the transmission fluid filter.
8. Replace the transmission fluid filter.
9. Add new transmission fluid to the transmission until the level is between the “full” and “add” marks on the dipstick.

Conclusion

If you are unable to reach the transmission fluid in your car, you will need to take it to a mechanic. However, if you are able to reach the transmission fluid, you can check and change the fluid yourself. By following the steps in this guide, you can keep your car’s transmission in good condition.