Car Mechanic Simulator 2018: Comprehensive Guide to Repairing Car Body
Introduction
Car Mechanic Simulator 2018 is an immersive simulation game that allows players to experience the intricacies of car repair. The game features a wide range of vehicles, each with its own unique challenges. This guide will focus exclusively on the process of repairing car bodies in Car Mechanic Simulator 2018.
Identifying Body Damage
Before beginning repairs, it’s crucial to identify the extent of the damage. Common types of body damage include:
– Dents: Indentations or depressions in the metal
– Scratches: Superficial marks on the paint
– Scuffs: Abrasions that remove the clear coat
– Rust: Oxidization of the metal, creating bubbles and flaking
– Broken panels: Damaged or missing parts, such as bumpers or fenders
Tools and Equipment
To perform car body repairs effectively, you’ll need the appropriate tools and equipment:
– Hammer: Used for shaping and removing dents
– Dolly: A support block used in conjunction with a hammer
– Sandpaper: For sanding down rust or paint defects
– Filler: A compound used to fill dents and imperfections
– Primer: A protective layer applied before painting
– Paint: The final coating that restores the vehicle’s appearance
– Polisher: Used to create a smooth, glossy finish
Repair Process
1. Preparation
– Remove any loose or damaged parts from the body.
– Clean the area to be repaired with a degreaser.
– Protect adjacent areas with masking tape or plastic sheeting.
2. Dent Repair
– Use a hammer and dolly to push out the dent from behind.
– If the dent is severe, it may be necessary to use a slide hammer or puller to extract the metal.
– Smooth out any remaining imperfections with sandpaper.
3. Rust Removal
– Sand down the rusted area to remove flaking material.
– Use a rust converter to neutralize the oxidation.
– Apply a primer to protect the bare metal from further corrosion.
4. Filler Application
– Mix filler according to the manufacturer’s instructions.
– Apply the filler to the dent or imperfection, smoothing it out with a putty knife.
– Allow the filler to dry completely.
5. Sanding and Priming
– Sand the filler to create a smooth surface.
– Apply a primer to the repaired area to provide a base for the paint.
6. Painting
– Select the appropriate paint color and mix it according to the manufacturer’s instructions.
– Apply multiple thin coats of paint, allowing each coat to dry completely before applying the next.
7. Polishing
– Once the paint has completely dried, use a polisher to create a smooth, glossy finish.
– Remove any polishing residue with a clean microfiber cloth.
Tips and Tricks
– Use a heat gun to soften the paint and make it easier to remove.
– Practice your hammer and dolly skills on scrap metal before attempting repairs on the actual vehicle.
– Take your time and don’t be afraid to consult with experienced mechanics if needed.
– Pay attention to the paint color and ensure a perfect match to avoid noticeable repairs.
– Always wear proper protective gear, including gloves and a respirator.
Conclusion
Repairing car bodies in Car Mechanic Simulator 2018 requires patience, precision, and a keen eye for detail. By following the steps outlined in this guide and utilizing the appropriate tools and techniques, you can restore damaged vehicles to their former glory. Remember to practice, consult with experts, and prioritize safety throughout the repair process.
