Car Mechanic Simulator: Can’t Take Out Transmission

Problem

You are trying to remove the transmission from a car in Car Mechanic Simulator, but you are unable to do so.

Cause

There are a few possible causes for this problem:

* The transmission is not in neutral.
* The driveshaft is not disconnected.
* The transmission mount is not removed.

Solution

To fix this problem, follow these steps:

1. Make sure that the transmission is in neutral.
2. Disconnect the driveshaft from the transmission.
3. Remove the transmission mount.
4. Remove the transmission from the car.

If you are still having trouble removing the transmission, you can try the following:

* Use a pry bar to help loosen the transmission.
* Tap the transmission with a hammer to help loosen it.
* Use a transmission jack to help support the transmission.

Additional Information

Here are some additional tips for removing a transmission:

* Always wear safety glasses and gloves when working on a car.
* Use the proper tools for the job.
* Be careful not to damage the transmission or other parts of the car.
* If you are not sure how to remove a transmission, consult a qualified mechanic.

Troubleshooting

If you are still having trouble removing the transmission, you can try the following:

* Check the transmission fluid level. If the fluid level is low, it can cause the transmission to bind.
* Inspect the transmission for any damage. If the transmission is damaged, it may need to be replaced.
* Consult a qualified mechanic for assistance.