Car Went Through Water: Check Transmission Fluid
Introduction
If your car has gone through water, it is important to check the transmission fluid. Water can damage the transmission, and if the fluid is contaminated, it can cause the transmission to fail.
How to Check the Transmission Fluid
1. Park the car on a level surface and allow it to cool down.
2. Open the hood and locate the transmission dipstick. The dipstick is usually located near the back of the engine, and it will have a red or orange handle.
3. Pull out the dipstick and wipe it clean with a rag.
4. Reinsert the dipstick into the transmission and pull it out again.
5. Check the fluid level on the dipstick. The fluid level should be between the “full” and “low” marks on the dipstick.
6. If the fluid level is low, add more fluid through the dipstick tube. Use only the type of fluid that is recommended for your car.
What to Do If the Transmission Fluid is Contaminated
If the transmission fluid is contaminated with water, it will appear brown or milky. If the fluid is contaminated, it is important to have the transmission serviced as soon as possible. Contaminated fluid can damage the transmission, and it can also cause the transmission to fail.
How to Prevent Water from Damaging the Transmission
There are a few things you can do to help prevent water from damaging the transmission:
* Avoid driving through deep water. If you must drive through water, go slowly and carefully.
* If you drive through deep water, check the transmission fluid as soon as possible.
* If the transmission fluid is contaminated, have the transmission serviced as soon as possible.
Conclusion
If your car has gone through water, it is important to check the transmission fluid. Water can damage the transmission, and if the fluid is contaminated, it can cause the transmission to fail. By following the tips in this article, you can help prevent water from damaging the transmission and keep your car running smoothly.
