Chilton 2004 lincoln town car transmission neutral safety switch location




2004 Lincoln Town Car Transmission Neutral Safety Switch Location

2004 Lincoln Town Car Transmission Neutral Safety Switch Location

What is a Neutral Safety Switch?

A neutral safety switch is a safety device that prevents a vehicle from starting in gear. The switch is located in the transmission and is actuated when the transmission is shifted into neutral. When the switch is actuated, it completes a circuit that allows the starter to engage.

Where is the Neutral Safety Switch Located on a 2004 Lincoln Town Car?

The neutral safety switch on a 2004 Lincoln Town Car is located on the passenger side of the transmission, near the top. The switch is held in place by two bolts. To access the switch, you will need to remove the air cleaner assembly and the battery tray.

How to Replace the Neutral Safety Switch on a 2004 Lincoln Town Car

  1. Disconnect the negative battery terminal.
  2. Remove the air cleaner assembly.
  3. Remove the battery tray.
  4. Locate the neutral safety switch on the passenger side of the transmission.
  5. Remove the two bolts that hold the switch in place.
  6. Disconnect the electrical connector from the switch.
  7. Install the new neutral safety switch.
  8. Tighten the two bolts that hold the switch in place.
  9. Connect the electrical connector to the switch.
  10. Reinstall the battery tray.
  11. Reinstall the air cleaner assembly.
  12. Reconnect the negative battery terminal.

Testing the Neutral Safety Switch

Once you have replaced the neutral safety switch, you should test it to make sure that it is working properly. To test the switch, follow these steps:

  1. Put the transmission in park.
  2. Turn the ignition key to the “on” position.
  3. The starter should not engage.
  4. Shift the transmission into neutral.
  5. Turn the ignition key to the “start” position.
  6. The starter should engage.

Conclusion

Replacing the neutral safety switch on a 2004 Lincoln Town Car is a relatively simple procedure. By following the steps outlined in this article, you can replace the switch yourself and save money on repairs.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: