Do You Check CVT Transmission Fluid with the Car Running?

Introduction

Continuously variable transmissions (CVTs) are a type of automatic transmission that uses a belt or chain to transfer power from the engine to the wheels. CVTs are found in a variety of vehicles, including cars, trucks, and SUVs.

CVT transmission fluid is a special type of fluid that is used to lubricate the belt or chain and the other components of the transmission. CVT transmission fluid is essential for the proper functioning of the transmission and should be checked and changed regularly.

Do You Check CVT Transmission Fluid with the Car Running?

The answer to the question of whether or not you check CVT transmission fluid with the car running depends on the specific vehicle. Some vehicles require you to check the transmission fluid with the car running, while others require you to check it with the car off.

If you are unsure of how to check the transmission fluid in your vehicle, it is best to consult your owner’s manual. The owner’s manual will provide you with the specific instructions for checking the transmission fluid in your vehicle.

How to Check CVT Transmission Fluid with the Car Running

If your vehicle requires you to check the transmission fluid with the car running, follow these steps:

1. Start the car and let it idle.
2. Open the hood and locate the transmission fluid dipstick.
3. Pull out the dipstick and wipe it clean with a rag.
4. Reinsert the dipstick into the transmission and pull it out again.
5. Check the transmission fluid level on the dipstick.
6. The transmission fluid level should be between the “min” and “max” marks on the dipstick.
7. If the transmission fluid level is low, add more fluid until it reaches the correct level.
8. Check the transmission fluid level again after driving the car for a few minutes.

How to Check CVT Transmission Fluid with the Car Off

If your vehicle requires you to check the transmission fluid with the car off, follow these steps:

1. Park the car on a level surface.
2. Open the hood and locate the transmission fluid dipstick.
3. Pull out the dipstick and wipe it clean with a rag.
4. Reinsert the dipstick into the transmission and pull it out again.
5. Check the transmission fluid level on the dipstick.
6. The transmission fluid level should be between the “min” and “max” marks on the dipstick.
7. If the transmission fluid level is low, add more fluid until it reaches the correct level.

Conclusion

Checking the CVT transmission fluid in your vehicle is an important part of maintaining your vehicle. By following the steps outlined above, you can ensure that your transmission is always operating at the correct fluid level.