Drag Car Transmission Brake

What is a Drag Car Transmission Brake?

A drag car transmission brake is a mechanical device that is used to slow down or stop a drag car. It is typically installed between the transmission and the driveshaft, and it works by using a hydraulic piston to apply pressure to the transmission’s input shaft. This pressure causes the shaft to stop rotating, which in turn stops the car.

How Does a Drag Car Transmission Brake Work?

A drag car transmission brake is a relatively simple device. It consists of a hydraulic piston, a pressure plate, and a friction disc. The piston is connected to a hydraulic line, which is in turn connected to a master cylinder. When the driver presses the brake pedal, the master cylinder sends hydraulic fluid to the piston. The piston then applies pressure to the pressure plate, which in turn applies pressure to the friction disc. The friction disc is connected to the transmission’s input shaft, and when it is pressed against the pressure plate, it stops the shaft from rotating.

What are the Benefits of a Drag Car Transmission Brake?

There are several benefits to using a drag car transmission brake. These benefits include:

• Increased stopping power: A drag car transmission brake can provide significantly more stopping power than a traditional brake system. This is because it applies pressure directly to the transmission’s input shaft, which in turn stops the car’s wheels from rotating.
• Reduced wear and tear on brakes: A drag car transmission brake can help to reduce wear and tear on the car’s brakes. This is because it is used to slow down the car, rather than the brakes.
• Improved safety: A drag car transmission brake can help to improve safety. This is because it can help to prevent the car from skidding or losing control during braking.

How to Choose a Drag Car Transmission Brake

When choosing a drag car transmission brake, there are several factors to consider. These factors include:

• The type of transmission: The type of transmission that you have will determine the type of drag car transmission brake that you need. There are specific brakes for manual and automatic transmissions.
• The size of the transmission: The size of the transmission will also determine the size of the drag car transmission brake that you need. Larger transmissions require larger brakes.
• The amount of stopping power that you need: The amount of stopping power that you need will depend on the weight of the car and the speed at which you will be driving. If you need more stopping power, you will need a larger drag car transmission brake.

How to Install a Drag Car Transmission Brake

Installing a drag car transmission brake is a relatively simple process. However, it is important to follow the manufacturer’s instructions carefully. Here are the general steps involved in installing a drag car transmission brake:

1. Remove the transmission from the car.
2. Install the drag car transmission brake between the transmission and the driveshaft.
3. Connect the hydraulic line to the master cylinder.
4. Fill the master cylinder with hydraulic fluid.
5. Bleed the brake system.
6. Reinstall the transmission in the car.

Conclusion

Drag car transmission brakes are a valuable addition to any drag car. They can provide increased stopping power, reduced wear and tear on brakes, and improved safety. If you are considering installing a drag car transmission brake, be sure to do your research and choose the right brake for your car.