Drag Car Transmission Cooler
What is a Drag Car Transmission Cooler?
A drag car transmission cooler is a device that helps to keep the transmission fluid cool during racing. This is important because high temperatures can damage the transmission and cause it to fail. Transmission coolers are typically installed in front of the radiator, where they can get plenty of airflow to help dissipate heat.
Types of Drag Car Transmission Coolers
There are two main types of drag car transmission coolers: air-to-oil coolers and water-to-oil coolers.
- Air-to-oil coolers use air to cool the transmission fluid. They are typically less expensive than water-to-oil coolers, but they are also less effective. Air-to-oil coolers are best suited for cars that are raced on short tracks or in cool climates.
- Water-to-oil coolers use water to cool the transmission fluid. They are more expensive than air-to-oil coolers, but they are also more effective. Water-to-oil coolers are best suited for cars that are raced on long tracks or in hot climates.
How to Choose the Right Drag Car Transmission Cooler
When choosing a drag car transmission cooler, you need to consider the following factors:
- The type of racing you will be doing Drag cars that are raced on short tracks or in cool climates can get away with using an air-to-oil cooler. Cars that are raced on long tracks or in hot climates will need a water-to-oil cooler.
- The size of your transmission Larger transmissions will require a larger cooler. Make sure to choose a cooler that is large enough to handle the heat output of your transmission.
- The budget Air-to-oil coolers are less expensive than water-to-oil coolers. If you are on a tight budget, an air-to-oil cooler may be a good option. If you are serious about racing, you should invest in a water-to-oil cooler.
How to Install a Drag Car Transmission Cooler
Installing a drag car transmission cooler is a relatively simple process. However, it is important to follow the manufacturer’s instructions carefully.
- Determine the location of the cooler The cooler should be installed in front of the radiator, where it can get plenty of airflow. Make sure to leave enough space around the cooler so that it can be easily removed for maintenance.
- Mount the cooler The cooler can be mounted using bolts or brackets. Make sure to use a sealant on the bolts or brackets to prevent leaks.
- Connect the hoses The hoses that connect the cooler to the transmission should be made of high-quality rubber or stainless steel. Make sure to use hose clamps to secure the hoses.
- Fill the cooler with fluid The cooler should be filled with the same type of fluid that is used in the transmission. Make sure to check the manufacturer’s instructions for the correct amount of fluid.
Tips for Maintaining a Drag Car Transmission Cooler
Here are a few tips for maintaining a drag car transmission cooler:
- Check the fluid level regularly The fluid level should be checked before each race. Add fluid as needed.
- Clean the cooler regularly The cooler should be cleaned regularly to remove dirt and debris. A soft brush or a vacuum cleaner can be used to clean the cooler.
- Replace the hoses regularly The hoses should be replaced every few years to prevent leaks.
Conclusion
A drag car transmission cooler is an essential component for any drag car. By keeping the transmission fluid cool, the cooler helps to prevent transmission damage and failure. When choosing a cooler, consider the type of racing you will be doing, the size of your transmission, and your budget. Be sure to follow the manufacturer’s instructions carefully when installing the cooler.
