Eric the Car Guy: How to Change Honda Transmission Oil
Introduction
Honda transmissions are known for their reliability and durability. However, like any other mechanical component, they require regular maintenance to keep them in good condition. One of the most important maintenance tasks is changing the transmission oil.
Changing the transmission oil is a relatively simple procedure that can be done at home with a few basic tools. In this article, we will show you how to change the transmission oil on a Honda Accord.
Tools and Materials
You will need the following tools and materials to change the transmission oil on a Honda Accord:
* New transmission oil (2.5 quarts)
* New transmission filter
* 17mm socket wrench
* 19mm socket wrench
* Torque wrench
* Drain pan
* Funnel
* Rags
Step-by-Step Instructions
1. Gather your tools and materials. Make sure you have all of the tools and materials listed above before you begin.
2. Park your car on a level surface. This will help to prevent the transmission oil from spilling out when you remove the drain plug.
3. Engage the parking brake. This will help to keep your car from rolling while you are working on it.
4. Locate the transmission oil pan. The transmission oil pan is located at the bottom of the transmission. It is usually made of metal and has a drain plug in the center.
5. Place the drain pan under the transmission oil pan. Make sure the drain pan is large enough to catch all of the transmission oil that will drain out.
6. Remove the drain plug. Use the 17mm socket wrench to remove the drain plug. Be careful not to drop the drain plug into the drain pan.
7. Allow the transmission oil to drain out. The transmission oil will drain out of the transmission oil pan into the drain pan. Allow the oil to drain out completely.
8. Replace the drain plug. Once the transmission oil has drained out, replace the drain plug. Tighten the drain plug to 25 ft-lbs using the torque wrench.
9. Locate the transmission filter. The transmission filter is located inside the transmission oil pan. Use the 19mm socket wrench to remove the transmission filter.
10. Replace the transmission filter. Install the new transmission filter into the transmission oil pan. Tighten the transmission filter to 18 ft-lbs using the torque wrench.
11. Add new transmission oil. Use the funnel to add new transmission oil to the transmission. Add 2.5 quarts of transmission oil.
12. Check the transmission oil level. Use the dipstick to check the transmission oil level. The oil level should be between the “L” and “H” marks.
13. Start your car and let it run for a few minutes. This will help to circulate the new transmission oil.
14. Check for leaks. Check under the car for any leaks. If you see any leaks, tighten the drain plug or transmission filter.
Conclusion
Changing the transmission oil on a Honda Accord is a relatively simple procedure that can be done at home with a few basic tools. By following the steps outlined in this article, you can keep your Honda’s transmission in good condition and extend its life.
