Filling Transmission Out of Car
Safety First
Before you begin, it is important to take some safety precautions. Park your car on a level surface and engage the parking brake. Allow the engine to cool down completely before you start working on it. You should also wear safety glasses and gloves to protect yourself from fluids and sharp metal edges.
Step 1: Gather Your Materials
You will need the following materials to fill your transmission out of car:
- New transmission fluid
- Funnel
- Transmission pan
- Transmission filter (optional)
- Wrench or socket set
- Clean rags
Step 2: Locate the Transmission Pan
The transmission pan is located on the bottom of the transmission. It is typically made of metal and has a bolt-on cover. To locate the transmission pan, look for a rectangular or oval-shaped pan that is attached to the transmission with bolts.
Step 3: Remove the Transmission Pan
Once you have located the transmission pan, you can remove it by following these steps:
- Place the transmission pan under the transmission.
- Loosen the bolts that hold the transmission pan in place.
- Carefully remove the transmission pan from the transmission.
- Allow the transmission fluid to drain into the transmission pan.
Step 4: Replace the Transmission Filter (Optional)
If you are replacing the transmission filter, you can do so now. To replace the transmission filter, simply remove the old filter from the transmission and replace it with the new filter.
Step 5: Fill the Transmission
To fill the transmission, simply pour the new transmission fluid into the transmission pan until the fluid level reaches the full mark on the transmission dipstick.
Step 6: Reinstall the Transmission Pan
Once you have filled the transmission, you can reinstall the transmission pan by following these steps:
- Place a new gasket on the transmission pan.
- Tighten the bolts that hold the transmission pan in place.
- Check the transmission fluid level and add more fluid if necessary.
Step 7: Check for Leaks
Once you have filled the transmission, it is important to check for leaks. To do this, simply start the engine and let it run for a few minutes. Then, check under the car for any leaks. If you see any leaks, tighten the bolts that hold the transmission pan in place until the leaks stop.
Conclusion
Filling your transmission out of car is a relatively simple procedure that can be completed in about an hour. By following the steps outlined in this article, you can save yourself the cost of having a mechanic do it for you.
