How to Start a Honda Fit With an Automatic Transmission

Starting a Honda Fit with an automatic transmission is a simple process that can be completed in a few steps. Follow the instructions below to get started.

Step 1: Enter the Vehicle

1. Unlock the doors using the key fob or the key.
2. Sit in the driver’s seat and close the door.

Step 2: Adjust the Seat and Mirrors

1. Adjust the seat to a comfortable position.
2. Adjust the mirrors so that you have a clear view of the road.

Step 3: Buckle Your Seatbelt

1. Locate the seatbelt buckle on the driver’s side.
2. Insert the metal tab of the seatbelt into the buckle.
3. Pull the seatbelt across your body and fasten it into place.

Step 4: Start the Engine

1. Make sure the gear selector is in the “Park” position.
2. Insert the key into the ignition and turn it to the “On” position.
3. Press the brake pedal with your right foot.
4. Turn the key to the “Start” position and hold it there until the engine starts.

Step 5: Put the Car in Gear

1. Once the engine is running, release the brake pedal.
2. Move the gear selector to the desired gear (e.g., “Drive,” “Reverse,” etc.).
3. Apply pressure to the accelerator pedal to begin driving.

Tips

• If the engine does not start, try turning the key to the “Off” position and then back to the “Start” position.
• If the engine continues to crank but does not start, there may be an issue with the battery, starter, or fuel system.
• If you are having trouble getting the car into gear, try moving the gear selector back and forth between “Park” and “Neutral” several times.

Conclusion

Starting a Honda Fit with an automatic transmission is a simple and straightforward process. By following the steps outlined above, you can get your car started and on the road in no time.