How to Add Transmission Fluid to a Manual Car

Step 1: Gather Your Materials

Before you begin, you will need to gather the following materials:

* Transmission fluid
* Funnel
* Rags
* Jack (optional)
* Jack stands (optional)

Step 2: Locate the Transmission Fluid Dipstick

The transmission fluid dipstick is usually located on the side of the transmission. It will have a red or orange handle.

Step 3: Check the Transmission Fluid Level

Pull out the dipstick and wipe it clean with a rag. Then, reinsert the dipstick all the way into the transmission. Pull it out again and check the fluid level. The fluid level should be between the two marks on the dipstick.

Step 4: Add Transmission Fluid

If the fluid level is low, add fluid using a funnel. Do not overfill the transmission. The fluid level should be between the two marks on the dipstick.

Step 5: Check for Leaks

Once you have added fluid, start the car and let it idle for a few minutes. Then, check for leaks under the car. If you see any leaks, tighten the drain plug or replace the gasket.

Step 6: Clean Up

Wipe up any spilled fluid with a rag. Dispose of the used fluid and funnel properly.

Additional Tips

* Check the transmission fluid level regularly, especially if you are experiencing any shifting problems.
* Use the type of transmission fluid that is recommended for your car.
* If you are not comfortable adding transmission fluid yourself, you can take your car to a mechanic.