How to Do Stripes on RC Car Bodies

Introduction

Stripes are a great way to add some personality to your RC car body. They can be simple or complex, and they can be used to create a variety of looks. In this article, we’ll show you how to do stripes on RC car bodies using a few different methods.

Method 1: Using Tape

The easiest way to do stripes on RC car bodies is to use tape. This method is simple and it doesn’t require any special tools or materials.

To do stripes using tape, follow these steps:

1. Clean the surface of the RC car body with a clean cloth and some rubbing alcohol. This will help the tape to adhere better.
2. Apply the tape to the RC car body in the desired pattern. You can use a variety of different types of tape, such as masking tape, painter’s tape, or electrical tape.
3. Use a sharp knife or razor blade to cut the tape around the edges of the RC car body.
4. Paint the RC car body with the desired color.
5. Once the paint has dried, remove the tape.

Method 2: Using Decals

Another way to do stripes on RC car bodies is to use decals. Decals are pre-cut vinyl stickers that can be applied to the RC car body. This method is a bit more difficult than using tape, but it can produce more professional-looking results.

To do stripes using decals, follow these steps:

1. Clean the surface of the RC car body with a clean cloth and some rubbing alcohol. This will help the decals to adhere better.
2. Apply the decals to the RC car body in the desired pattern.
3. Use a sharp knife or razor blade to trim the decals around the edges of the RC car body.
4. Clear coat the RC car body to protect the decals.

Method 3: Using Paint

The most difficult way to do stripes on RC car bodies is to use paint. This method requires a steady hand and some experience with painting.

To do stripes using paint, follow these steps:

1. Clean the surface of the RC car body with a clean cloth and some rubbing alcohol. This will help the paint to adhere better.
2. Mask off the areas of the RC car body that you don’t want to paint.
3. Apply the paint to the RC car body in the desired pattern.
4. Once the paint has dried, remove the masking tape.
5. Clear coat the RC car body to protect the paint.

Conclusion

Stripes are a great way to add some personality to your RC car body. There are a variety of different methods that you can use to do stripes, so choose the one that is best for you. With a little practice, you’ll be able to create beautiful stripes that will make your RC car stand out from the crowd.