How to Launch a Car with Automatic Transmission

Step 1: Prepare the Car

Before you start launching the car, you need to make sure it is ready. This means checking the tire pressure, making sure the transmission fluid is full, and inspecting the brakes.

Step 2: Put the Car in Drive

Once the car is prepared, you can put it in drive. To do this, simply move the gear selector to the “D” position.

Step 3: Hold the Brake

With the car in drive, you need to hold the brake pedal down. This will prevent the car from moving forward.

Step 4: Rev the Engine

While holding the brake pedal down, you need to rev the engine. To do this, simply press down on the gas pedal.

Step 5: Release the Brake

Once the engine is revved up, you can release the brake pedal. The car will then start to move forward.

Step 6: Control the Throttle

As the car starts to move forward, you need to control the throttle. To do this, simply press down on the gas pedal and let it up as needed.

Step 7: Shift gears

As the car gets up to speed, you will need to shift gears. To do this, simply move the gear selector to the next highest position.

Tips

• Make sure you are on a safe and clear road when you launch the car.
• Do not launch the car if the tires are cold or wet.
• Be careful not to over-rev the engine.
• Shift gears smoothly and quickly.

Conclusion

Launching a car with automatic transmission is not difficult, but it does require some practice. By following the steps in this guide, you can launch your car safely and quickly.