How to Pull Out Dents in Car Body

Introduction

Dents in a car body can be frustrating, but they don’t have to be permanent. There are a few different methods you can use to pull out dents, depending on the size and location of the dent. In this article, we’ll discuss the most common methods for pulling out dents, including using a plunger, a hair dryer, and a dent puller.

Using a Plunger

One of the simplest and most effective ways to pull out a dent is to use a plunger. To do this, simply wet the plunger and place it over the dent. Then, apply gentle pressure and pull the plunger towards you. The suction created by the plunger will help to pull the dent out.

Using a Hair Dryer

Another method for pulling out dents is to use a hair dryer. To do this, hold the hair dryer about 6 inches away from the dent and turn it on to the highest heat setting. Then, move the hair dryer back and forth over the dent until the metal becomes hot. Once the metal is hot, use a wet cloth to press down on the dent. The heat from the hair dryer will help to soften the metal and make it more pliable, which will allow the cloth to push the dent out.

Using a Dent Puller

For larger dents, you may need to use a dent puller. Dent pullers are available at most auto parts stores. To use a dent puller, first clean the area around the dent with rubbing alcohol. Then, attach the dent puller to the dent. The dent puller will have a suction cup or a hook that you can use to attach it to the dent. Once the dent puller is attached, pull it towards you to pull the dent out.

Tips for Pulling Out Dents

Here are a few tips for pulling out dents:

* Start by trying the simplest methods first, such as using a plunger or a hair dryer. If these methods don’t work, you can try using a dent puller.
* Be patient and apply gentle pressure. Pulling too hard can damage the metal.
* If you’re having trouble pulling out a dent, you can try using a lubricant, such as WD-40.
* If the dent is located on a painted surface, be careful not to damage the paint. You can use a piece of tape to protect the paint around the dent.

Conclusion

Pulling out dents in a car body can be a challenging task, but it’s possible to do it yourself with a little patience and the right tools. If you’re not comfortable trying to pull out a dent yourself, you can always take your car to a professional body shop.