How to Push Start a Car with Manual Transmission
Push starting a car with manual transmission is a fairly straightforward process, but it does require some coordination between the driver and the people pushing the car. Here are the steps on how to do it:
1. Safety First
Before you start, make sure it is safe to push start your car. This means being on a flat, level surface and out of the way of traffic. You should also make sure the parking brake is off.
2. Get Help
You will need at least two people to help you push start your car. One person will sit in the driver’s seat and steer, while the other people will push the car from behind.
3. Turn the Key to the “On” Position
The driver should turn the key to the “on” position, but do not start the engine. This will allow the steering wheel to unlock and the electrical system to power up.
4. Put the Car in Second Gear
The driver should put the car in second gear. This will make it easier to push start the car.
5. Push the Car
The people pushing the car should start pushing it forward. The driver should release the clutch slowly as the car starts to move. Once the car is moving at a few miles per hour, the driver should press the gas pedal and the engine should start.
6. Drive Away
Once the engine is running, the driver can drive away. It is important to drive slowly at first until the engine is fully warmed up.
Tips
- Make sure the car is in neutral before you start pushing it.
- Do not release the clutch too quickly or the car will stall.
- If the car does stall, do not try to push start it again immediately. Wait a few minutes for the starter to cool down.
- If you are having trouble push starting the car, you may need to get a jump start from another car.
Conclusion
Push starting a car with manual transmission is a relatively simple process, but it does require some coordination between the driver and the people pushing the car. By following these steps, you can safely and easily push start your car.
