How to Remove Dealer Plaques on Car Body
Introduction
Dealer plaques, those small metal or plastic emblems that advertise the dealership where you bought your car, can be a bit of an eyesore. They’re not always attractive, and they can make your car look cluttered. If you’re looking to remove a dealer plaque from your car, there are a few different methods you can use.
Method 1: Using Dental Floss
1. Cut a piece of dental floss about 12 inches long.
2. Thread the floss behind the dealer plaque.
3. Pull the floss back and forth until the plaque comes loose.
4. Be careful not to scratch the paint on your car.
Method 2: Using a Heat Gun
1. Hold a heat gun about 6 inches away from the dealer plaque.
2. Heat the plaque until the adhesive starts to soften.
3. Use a plastic pry tool to carefully remove the plaque.
4. Be careful not to burn yourself or damage the paint on your car.
Method 3: Using a Chemical Adhesive Remover
1. Apply a chemical adhesive remover to a cotton ball or cloth.
2. Rub the adhesive remover around the edges of the dealer plaque.
3. Let the adhesive remover sit for a few minutes.
4. Use a plastic pry tool to carefully remove the plaque.
5. Be careful not to get any adhesive remover on the paint on your car.
Method 4: Using a Razor Blade
1. Hold a razor blade at a 45-degree angle to the dealer plaque.
2. Carefully scrape the blade along the edge of the plaque until it comes loose.
3. Be careful not to scratch the paint on your car.
Method 5: Using a Hairdryer
1. Hold a hairdryer about 6 inches away from the dealer plaque.
2. Turn the hairdryer on to its highest setting.
3. Heat the plaque until the adhesive starts to soften.
4. Use a plastic pry tool to carefully remove the plaque.
5. Be careful not to burn yourself or damage the paint on your car.
Tips
– If you’re having trouble removing the dealer plaque, try using a combination of methods.
– Be patient and take your time. It may take a few tries to get the plaque off.
– If you’re worried about damaging the paint on your car, you can use a piece of masking tape to protect it.
– Once you’ve removed the dealer plaque, you can clean the area with a mild soap and water solution.
Conclusion
Removing a dealer plaque from your car is a relatively easy task. With a little patience and the right tools, you can have your car looking its best in no time.
