How to Remove Double Sided Tape from Car Body
Double-sided tape is a strong adhesive that is often used to attach accessories to car bodies. However, it can be difficult to remove once it has been applied. If you need to remove double-sided tape from your car body, there are a few different methods you can try.
Using a Heat Gun:
1. Gather your materials. You will need a heat gun, a putty knife, and a clean cloth.
2. Heat the tape. Hold the heat gun about 6 inches away from the tape and move it back and forth until the tape begins to soften.
3. Pry the tape off. Use the putty knife to carefully pry the tape off of the car body. Be careful not to scratch the paint.
4. Wipe away any residue. Use the clean cloth to wipe away any remaining residue from the tape.
Using a Hairdryer:
1. Gather your materials. You will need a hair dryer, a putty knife, and a clean cloth.
2. Heat the tape. Hold the hair dryer about 6 inches away from the tape and move it back and forth until the tape begins to soften.
3. Pry the tape off. Use the putty knife to carefully pry the tape off of the car body. Be careful not to scratch the paint.
4. Wipe away any residue. Use the clean cloth to wipe away any remaining residue from the tape.
Using a Citrus-Based Solvent:
1. Gather your materials. You will need a citrus-based solvent, a clean cloth, and a pair of gloves.
2. Apply the solvent to the tape. Apply a small amount of solvent to the tape and let it sit for a few minutes.
3. Wipe away the tape. Use the clean cloth to wipe away the tape. Be careful not to get the solvent on the paint.
4. Rinse the area. Use water to rinse the area where the tape was applied.
Using a Goo Gone:
1. Gather your materials. You will need a can of Goo Gone, a clean cloth, and a pair of gloves.
2. Apply the Goo Gone to the tape. Apply a small amount of Goo Gone to the tape and let it sit for a few minutes.
3. Wipe away the tape. Use the clean cloth to wipe away the tape. Be careful not to get the Goo Gone on the paint.
4. Rinse the area. Use water to rinse the area where the tape was applied.
Using a WD-40:
1. Gather your materials. You will need a can of WD-40, a clean cloth, and a pair of gloves.
2. Apply the WD-40 to the tape. Apply a small amount of WD-40 to the tape and let it sit for a few minutes.
3. Wipe away the tape. Use the clean cloth to wipe away the tape. Be careful not to get the WD-40 on the paint.
4. Rinse the area. Use water to rinse the area where the tape was applied.
Tips:
* If the tape is particularly stubborn, you may need to use a combination of methods.
* Be careful not to use too much heat, as this can damage the paint.
* If you are using a citrus-based solvent or Goo Gone, be sure to wear gloves to protect your skin.
* Rinse the area thoroughly after using any cleaning products.
