How to Repaint an RC Car Body
Repainting an RC car body is a great way to give your car a fresh look and make it stand out from the crowd. It’s also a relatively easy and inexpensive project that can be completed in a few hours.
Materials You’ll Need
* RC car body
* Sandpaper (120-grit, 220-grit, and 400-grit)
* Tack cloth
* Primer
* Paint
* Clear coat
* Masking tape
* Newspaper or plastic sheeting
Step 1: Prepare the Body
The first step is to prepare the body for painting. This involves sanding down the existing paint or finish to create a smooth surface for the new paint to adhere to. Start with 120-grit sandpaper and sand the entire body, including any curves or contours. Once you’ve sanded the entire body with 120-grit sandpaper, switch to 220-grit sandpaper and sand again. Finally, finish with 400-grit sandpaper to smooth out the surface.
Once you’ve sanded the body, wipe it down with a tack cloth to remove any dust or debris.
Step 2: Apply Primer
Primer is essential for creating a strong bond between the paint and the body. Apply a thin, even coat of primer to the entire body, including any curves or contours. Allow the primer to dry completely before proceeding to the next step.
Step 3: Apply Paint
Now it’s time to apply the paint. You can use any type of paint you like, but automotive paint is typically the best choice for RC car bodies. Apply a thin, even coat of paint to the entire body, including any curves or contours. Allow the paint to dry completely before applying a second coat.
Step 4: Apply Clear Coat
Clear coat is essential for protecting the paint from scratches and chips. Apply a thin, even coat of clear coat to the entire body, including any curves or contours. Allow the clear coat to dry completely before handling the body.
Step 5: Mask and Paint Details
Once the clear coat has dried, you can mask off any areas you don’t want painted, such as windows or headlights. Then, apply a thin, even coat of paint to the masked areas. Allow the paint to dry completely before removing the masking tape.
Step 6: Reassemble the Car
Once the paint is completely dry, you can reassemble the car. Start by attaching the body to the chassis. Then, reattach the wheels and any other parts you removed during the painting process.
Tips
* Use a light touch when sanding the body. Sanding too aggressively can damage the body.
* Apply thin, even coats of paint. Applying too much paint can cause runs or drips.
* Allow each coat of paint to dry completely before applying the next coat.
* Use a clear coat to protect the paint from scratches and chips.
* If you’re not sure how to do something, consult a professional.
