How to Repair Body Parts in Car Mechanic Simulator 2018

Introduction

In Car Mechanic Simulator 2018, you can repair a variety of body parts on cars, including bumpers, fenders, hoods, and doors. Repairing body parts can improve the appearance of a car and increase its value. In this guide, we will show you how to repair body parts in Car Mechanic Simulator 2018.

Tools and Materials

To repair body parts in Car Mechanic Simulator 2018, you will need the following tools and materials:

• A hammer
• A dolly
• A body filler
• A sanding block
• Sandpaper

Step-by-Step Instructions

Follow these step-by-step instructions to repair body parts in Car Mechanic Simulator 2018:

1. Remove the damaged body part

The first step is to remove the damaged body part. To do this, locate the bolts or screws that are holding the body part in place and remove them. Once the bolts or screws are removed, you can carefully remove the body part.

2. Clean the damaged area

Once the damaged body part is removed, you need to clean the damaged area. This will help to remove any dirt or debris that could interfere with the repair process. To clean the damaged area, use a damp cloth and mild soap.

3. Hammer out the dents

If the damaged body part has any dents, you need to hammer them out. To do this, place the dolly on the inside of the dent and use the hammer to hit the outside of the dent. Repeat this process until the dent is removed.

4. Apply body filler

Once the dents have been removed, you need to apply body filler to the damaged area. Body filler is a type of putty that can be used to fill in holes and cracks. To apply body filler, use a putty knife to spread the body filler over the damaged area. Once the body filler has been applied, allow it to dry for the amount of time specified on the packaging.

5. Sand the body filler

Once the body filler has dried, you need to sand it down to smooth it out. To do this, use a sanding block and sandpaper. Start with a coarse sandpaper and gradually work your way down to a fine sandpaper.

6. Paint the repaired area

Once the body filler has been sanded, you need to paint the repaired area. To do this, use a spray paint that matches the color of the car. Apply several thin coats of paint, allowing each coat to dry before applying the next.

7. Reinstall the body part

Once the paint has dried, you can reinstall the body part. To do this, simply line up the body part with the holes or screws that you removed in step 1 and insert the bolts or screws. Tighten the bolts or screws until the body part is secure.

Conclusion

Repairing body parts in Car Mechanic Simulator 2018 is a relatively simple process. By following the steps outlined in this guide, you can repair any damaged body part and restore your car to its former glory.