Painting Lexan RC Car Bodies

Materials

You will need the following materials to paint a Lexan RC car body:

• Lexan RC car body
• Sandpaper (120-grit, 220-grit, and 320-grit)
• Masking tape
• Primer
• Paint
• Clear coat
• Body reamer
• Scissors

Preparation

Before you begin painting, you need to prepare the Lexan body.

1. Sand the body with 120-grit sandpaper to remove any imperfections.
2. Wash the body with soap and water to remove any dirt or dust.
3. Mask off any areas of the body that you do not want to paint.
4. Apply a coat of primer to the body.
5. Allow the primer to dry completely.

Painting

Once the primer is dry, you can begin painting the body.

1. Choose the color of paint that you want to use.
2. Apply a thin coat of paint to the body.
3. Allow the paint to dry completely.
4. Repeat steps 2 and 3 until you are satisfied with the coverage.

Clear Coating

Once the paint is dry, you can apply a clear coat to protect it.

1. Choose the type of clear coat that you want to use.
2. Apply a thin coat of clear coat to the body.
3. Allow the clear coat to dry completely.
4. Repeat steps 2 and 3 until you are satisfied with the protection.

Finishing

Once the clear coat is dry, you can finish the body.

1. Remove the masking tape.
2. Trim any excess paint or clear coat.
3. Use a body reamer to enlarge the holes for the body posts.
4. Install the body on your RC car.

Tips

Here are a few tips for painting Lexan RC car bodies:

• Use light, even strokes when painting.
• Allow each coat of paint to dry completely before applying the next coat.
• Use a clear coat to protect the paint from scratches and wear.
• Be patient and don’t rush the process.

Conclusion

Painting Lexan RC car bodies is a fun and rewarding experience. With a little practice, you can create custom bodies that will make your RC car stand out from the crowd.