Painting Lexan RC Car Bodies
Introduction
Lexan is a lightweight, durable plastic that is often used to make RC car bodies. It’s a great material for painting, as it takes paint well and can be easily masked and detailed. In this article, we’ll go over the basics of painting Lexan RC car bodies, including the materials you’ll need, the steps involved, and some tips and tricks for getting the best results.
Materials
To paint a Lexan RC car body, you’ll need the following materials:
* Lexan RC car body
* Primer
* Paint
* Clear coat
* Masking tape
* Scissors
* Hobby knife
* Sandpaper
* Automotive polish
Steps
Once you have all of your materials, you can begin painting your Lexan RC car body. Here are the steps involved:
1. Prepare the body. The first step is to prepare the body for painting. This involves cleaning it with soap and water, and then sanding it lightly with 400-grit sandpaper. This will help to create a smooth surface for the paint to adhere to.
2. Apply primer. Once the body is prepared, you can apply a coat of primer. Primer helps to fill in any scratches or imperfections in the surface of the body, and it also helps to create a bond between the paint and the body.
3. Apply paint. Once the primer is dry, you can apply paint. You can use any type of paint that is designed for Lexan, but we recommend using automotive paint for the best results. Apply several thin coats of paint, allowing each coat to dry completely before applying the next.
4. Apply clear coat. Once the paint is dry, you can apply a coat of clear coat. Clear coat helps to protect the paint from scratches and fading, and it also gives it a glossy finish.
5. Unmask and detail. Once the clear coat is dry, you can unmask the body and add any details, such as decals or pin striping. You can also use automotive polish to give the body a high-shine finish.
Tips and Tricks
Here are a few tips and tricks for getting the best results when painting Lexan RC car bodies:
* Use high-quality materials. The quality of the materials you use will have a big impact on the finished product. We recommend using automotive paint and clear coat for the best results.
* Prepare the body properly. The better you prepare the body, the better the paint will adhere to it. Be sure to clean it thoroughly and sand it lightly before applying primer.
* Apply thin coats of paint. Applying thin coats of paint will help to prevent runs and drips. Allow each coat to dry completely before applying the next.
* Use clear coat to protect the paint. Clear coat will help to protect the paint from scratches and fading. It will also give it a glossy finish.
* Unmask the body carefully. Once the clear coat is dry, you can unmask the body. Be careful not to scratch the paint when you do this.
* Detail the body to your liking. Once the body is unmasked, you can add any details, such as decals or pin striping. You can also use automotive polish to give it a high-shine finish.
Conclusion
Painting Lexan RC car bodies is a fun and rewarding experience. By following the steps and tips outlined in this article, you can achieve professional-looking results. With a little practice, you’ll be able to create custom RC car bodies that are truly unique.
