Push Starting a Car with Automatic Transmission

Introduction

Push starting a car, also known as bump starting, is a technique used to start a car with a dead battery. It involves pushing the car to a certain speed and then releasing the clutch to engage the engine and start the car. However, push starting a car with an automatic transmission is different from push starting a car with a manual transmission.

Safety Precautions

Before attempting to push start a car with an automatic transmission, it is important to take the following safety precautions:

1. Park the car on a flat, level surface.
2. Put the car in neutral.
3. Turn off the ignition.
4. Engage the parking brake.
5. Get out of the car and stand clear of the vehicle.

Instructions

To push start a car with an automatic transmission, follow these instructions:

1. Have someone help you push the car.
2. Get in the driver’s seat and turn the ignition to the “on” position.
3. Do not start the engine.
4. Have your helper push the car forward until it reaches a speed of about 5 mph.
5. Once the car is moving at 5 mph, release the parking brake and shift the transmission into drive.
6. The car should start immediately.
7. Once the car is started, let your helper know so they can stop pushing.

Tips

Here are some tips for push starting a car with an automatic transmission:

• Make sure the car is in neutral before starting the push.
• Do not release the clutch too quickly or the car will stall.
• If the car does not start on the first try, repeat the process.
• Do not push the car for more than 10 seconds at a time.

Conclusion

Push starting a car with an automatic transmission is a simple procedure that can be performed with a little help from a friend. By following the instructions and tips outlined in this article, you can safely and easily start your car with a dead battery.