RC Cars: Lexan Body Airbrush Paint
Airbrushing is a popular technique for painting RC car lexan bodies. It allows you to create smooth, even coats of paint, and it can be used to achieve a wide variety of effects.
Materials
To airbrush a lexan body, you will need the following materials:
- Airbrush
- Air compressor
- Lexan paint
- Primer
- Clear coat
- Masking tape
- Sandpaper
- Tack cloths
Preparation
Before you start painting, you will need to prepare the lexan body. This involves cleaning the body with a tack cloth, sanding it with fine-grit sandpaper, and priming it with a lexan primer.
Painting
Once the body is prepared, you can start painting. Begin by applying a thin coat of paint to the entire body. Once the first coat is dry, you can start adding details and effects.
To create smooth, even coats of paint, hold the airbrush perpendicular to the body and move it in a steady, controlled motion. Avoid holding the airbrush too close to the body, as this can cause the paint to run.
You can use a variety of techniques to create different effects. For example, you can use a stencil to create a design, or you can use a sponge to create a faded effect.
Clear Coating
Once you are finished painting the body, you will need to apply a clear coat to protect the paint. Clear coats are available in a variety of finishes, including gloss, semi-gloss, and matte.
To apply a clear coat, hold the airbrush perpendicular to the body and move it in a steady, controlled motion. Avoid holding the airbrush too close to the body, as this can cause the clear coat to run.
Tips
Here are a few tips for airbrushing lexan bodies:
- Use a light touch when painting. This will help prevent the paint from running.
- Hold the airbrush perpendicular to the body and move it in a steady, controlled motion.
- Avoid holding the airbrush too close to the body, as this can cause the paint to run.
- Use a variety of techniques to create different effects.
- Be patient and take your time. Airbrushing lexan bodies takes practice.
Conclusion
Airbrushing is a great way to add a custom touch to your RC car. With a little practice, you can create beautiful, professional-looking lexan bodies.
