How to Remove Paint from Lexan RC Car Body
Introduction
Lexan is a polycarbonate plastic that is commonly used to make RC car bodies. It is a durable material that can withstand the rigors of racing, but it can also be difficult to remove paint from. If you want to change the color of your RC car body or remove old paint, there are a few different methods you can use.
Methods for Removing Paint from Lexan
1. Using a Chemical Paint Stripper
Chemical paint strippers are available at most hardware stores. They are a powerful solution that can quickly remove paint from Lexan. However, it is important to use chemical paint strippers with caution. They can be harmful to your skin and eyes, and they can damage Lexan if they are not used properly.
To use a chemical paint stripper, follow these steps:
1. Apply the paint stripper to a small area of the Lexan body using a brush or sponge.
2. Allow the paint stripper to sit for the amount of time specified on the product label.
3. Use a scraper or putty knife to remove the softened paint.
4. Rinse the Lexan body with water and dry it thoroughly.
2. Using a Heat Gun
A heat gun can also be used to remove paint from Lexan. However, it is important to use a heat gun with caution. Too much heat can damage Lexan.
To use a heat gun to remove paint from Lexan, follow these steps:
1. Hold the heat gun about 6 inches away from the Lexan body.
2. Move the heat gun back and forth over the paint until it begins to soften.
3. Use a scraper or putty knife to remove the softened paint.
4. Rinse the Lexan body with water and dry it thoroughly.
3. Using a Sandpaper
Sandpaper can also be used to remove paint from Lexan. However, it is important to use fine-grit sandpaper and to sand lightly. Too much sanding can damage Lexan.
To use sandpaper to remove paint from Lexan, follow these steps:
1. Wet the sandpaper with water.
2. Sand the paint lightly using a circular motion.
3. Rinse the Lexan body with water and dry it thoroughly.
Tips for Removing Paint from Lexan
* Test the paint stripper or heat gun on a small area of the Lexan body before using it on the entire body.
* Wear gloves and eye protection when using chemical paint strippers or heat guns.
* Work in a well-ventilated area.
* Rinse the Lexan body thoroughly with water after removing the paint.
* Dry the Lexan body thoroughly before painting it again.
Conclusion
Removing paint from Lexan can be a challenging task, but it is possible with the right methods and materials. By following the steps outlined in this article, you can safely and effectively remove paint from your Lexan RC car body.
