Tips on Painting Lexan RC Car Bodies
Introduction
Painting Lexan RC car bodies can be a fun and rewarding experience, but it can also be challenging. With the right techniques and materials, you can achieve professional-looking results that will make your car stand out from the crowd.
Materials You’ll Need
- Lexan RC car body
- Sandpaper (100-grit, 220-grit, 400-grit)
- Masking tape
- Primer
- Paint
- Clear coat
- Airbrush or spray gun
- Safety glasses
- Respirator
Step-by-Step Instructions
1. Prepare the Body
Start by sanding the body with 100-grit sandpaper to remove any imperfections or scratches. Then, switch to 220-grit sandpaper to smooth out the surface. Finally, finish with 400-grit sandpaper to create a fine, even finish.
2. Mask the Body
Use masking tape to protect areas of the body that you don’t want to paint. This includes windows, headlights, taillights, and any other details.
3. Apply Primer
Primer helps the paint to adhere to the body and prevents it from chipping or peeling. Apply a thin, even coat of primer to the entire body. Allow the primer to dry completely before moving on to the next step.
4. Paint the Body
Now it’s time to paint the body. You can use an airbrush or a spray gun. If you’re using an airbrush, thin the paint according to the manufacturer’s instructions. If you’re using a spray gun, follow the instructions in the user manual.
Apply several thin coats of paint, allowing each coat to dry completely before applying the next. This will help to prevent runs and drips.
5. Remove the Masking Tape
Once the paint is dry, carefully remove the masking tape. Be sure to do this slowly and gently to avoid damaging the paint.
6. Apply Clear Coat
Clear coat protects the paint from scratches and fading. Apply several thin coats of clear coat, allowing each coat to dry completely before applying the next.
7. Allow the Body to Dry
Allow the body to dry completely before handling it. This may take several hours or even overnight.
Tips
- Use high-quality paint and materials.
- Take your time and don’t rush the process.
- Practice on a scrap piece of Lexan before painting your actual body.
- Wear safety glasses and a respirator when painting.
- Allow the body to dry completely before handling it.
Conclusion
With a little practice, you can achieve professional-looking results when painting Lexan RC car bodies. By following the tips and instructions in this article, you can create a custom body that will make your car stand out from the crowd.
