Towing an Automatic Transmission Car

Introduction

Towing an automatic transmission car can be a tricky task. If not done correctly, it can damage the transmission. Here are some tips on how to tow an automatic transmission car safely and correctly.

Preparation

1. Check your owner’s manual. It will have specific instructions on how to tow your car.
2. Gather the necessary equipment. You will need a tow bar, tow rope, and safety chains.
3. Disconnect the driveshaft. This will prevent the transmission from being damaged.
4. Put the car in neutral. This will allow the car to roll freely.
5. Attach the tow bar and safety chains. Make sure they are secure.

Towing

1. Start the tow vehicle.
2. Slowly release the brake pedal. The tow vehicle should start to pull the car.
3. Monitor the car’s speed. Keep it under 35 mph.
4. Be aware of the car’s surroundings. Avoid sudden stops or turns.
5. Stop the tow vehicle when you reach your destination.

Tips

• Use a tow dolly. This is the safest way to tow an automatic transmission car.
• Tow for short distances only. If you need to tow for a long distance, consider using a flatbed tow truck.
• Have the car inspected by a mechanic after towing. This will ensure that the transmission has not been damaged.

Conclusion

Towing an automatic transmission car can be done safely and correctly by following these tips. By taking the proper precautions, you can avoid damaging your car and keep everyone safe.