When Starting a Car That Has an Automatic Transmission

Step 1: Sit in the Driver’s Seat and Close the Door

The first step is to sit in the driver’s seat and close the door. This will help you to get comfortable and familiar with the controls before you start the engine.

Step 2: Apply the Parking Brake

The next step is to apply the parking brake. This will help to keep the car from rolling away while you are starting it.

Step 3: Put the Key in the Ignition

Once you have applied the parking brake, you can put the key in the ignition.

Step 4: Turn the Key to the “On” Position

The next step is to turn the key to the “on” position. This will turn on the electrical system and allow you to start the engine.

Step 5: Shift the Gear Selector to “Park”

Once the electrical system is on, you can shift the gear selector to “park.” This will put the transmission in park and prevent the car from rolling away.

Step 6: Press the Start Button

The next step is to press the start button. This will start the engine.

Step 7: Release the Parking Brake

Once the engine is running, you can release the parking brake.

Step 8: Drive!

You are now ready to drive! Simply shift the gear selector to the desired gear and press the gas pedal.

Tips

• If the car does not start, try turning the key to the “off” position and then back to the “on” position.
• If the car still does not start, you may need to jump-start it.
• If the car starts but then stalls, try pressing the gas pedal slightly.
• If the car is making a strange noise, stop driving immediately and have it checked out by a mechanic.

Conclusion

Starting a car with an automatic transmission is a simple process. By following these steps, you can get your car started and on the road in no time.