Where is Transmission Fluid in Car?
What is Transmission Fluid?
Transmission fluid is a type of lubricant used in automatic and manual transmissions to reduce friction and wear between the transmission components. It helps to keep the transmission running smoothly and efficiently, and prevents metal-on-metal contact between the gears and other moving parts.
Where is Transmission Fluid Located?
The transmission fluid is typically located in a reservoir or sump at the bottom of the transmission. The reservoir is usually made of plastic or metal, and is attached to the transmission case. The sump is a metal pan that collects the transmission fluid that drips from the gears and other moving parts.
How to Check Transmission Fluid Level
To check the transmission fluid level, you will need to first locate the transmission fluid dipstick. The dipstick is usually located near the top of the transmission, and is usually marked with a red or orange handle. Once you have found the dipstick, pull it out and wipe it clean with a rag. Then, reinsert the dipstick into the transmission and pull it out again. The transmission fluid level should be between the “Full” and “Add” marks on the dipstick.
How to Add Transmission Fluid
If the transmission fluid level is low, you will need to add more fluid. To do this, you will need to find the transmission fluid filler plug. The filler plug is usually located on the side of the transmission, and is usually marked with a blue or green cap. Once you have found the filler plug, remove the cap and insert a funnel into the hole. Then, add transmission fluid until the level reaches the “Full” mark on the dipstick.
How to Change Transmission Fluid
The transmission fluid should be changed every 30,000 to 60,000 miles, or as recommended by your vehicle’s manufacturer. To change the transmission fluid, you will need to first drain the old fluid from the transmission. To do this, you will need to locate the transmission drain plug. The drain plug is usually located on the bottom of the transmission, and is usually marked with a black or silver cap. Once you have found the drain plug, place a drain pan under the transmission and remove the plug. Allow the old fluid to drain out completely.
Once the old fluid has drained out, you can install a new transmission fluid filter. The filter is usually located inside the transmission pan. To remove the old filter, simply unscrew it from the transmission pan. Then, screw on the new filter and tighten it securely.
Once the new filter is installed, you can add new transmission fluid to the transmission. To do this, simply insert a funnel into the transmission fluid filler plug hole and add fluid until the level reaches the “Full” mark on the dipstick.
Conclusion
Checking, adding, and changing transmission fluid is an important part of maintaining your vehicle. By following the steps outlined in this article, you can help to keep your transmission running smoothly and efficiently for many years to come.
